A longer footwell would make this scooter much more comfortable
I've been using my scooter for about eight months now and the one thing I keep noticing is the footwell. It's just short enough that my heels end up hanging off the back edge, and after an hour or so my ankles start to ache. I've tried adjusting the seat depth but that only helps a little. Has anyone found a workaround for this? I really don't want to buy a whole new scooter just for this one issue.
What model is it? That would help a lot. Some brands have a footplate extension you can bolt on.
I had the same problem with mine. My heels hung off and it made my lower back hurt too because I was bracing my feet weirdly. I ended up getting a small wooden platform made by a neighbor who does carpentry. It's not pretty but it works. Just make sure whatever you add doesn't interfere with the tiller or the ground clearance.
Have you looked at whether the seat can slide back at all? Even an inch can change the angle of your leggs enough to take pressure off your heels.
There are aftermarket footrests that clamp onto the frame. I've seen them on mobility accessory sites. They're adjustable and some are padded. Might be worth measuring the width of your footwell first though, because not all of them fit every scooter.
Also worth checking if your scooter has a sliding seat mechanism that's just stiff from lack of use. Mine was stuck, and I thought it was fixed in place, but a bit of lubricant and some firm pressure got it moving. Gave me about two inches of extra legroom.
I dont think a longer footwell is always the answer. If your feet are too far forward you end up slouching to reach the tiller. Sometimes the issue is the seat height or the angle of the backrest. Have you tried sitting with a small cushion behind your lower back to chnge your posture?
The cushion idea is interesting, but it doesn't solve the heel overhang. For me the platform was the only thing that really worked. i used a piece of marine plywood and covered it with some non slip matting. It's held on with two metal brackets and has survived two winters so far.
One thing to be careful about with any DIY extension is the anti-tip wheels at the back. If you add weight or change the balance point even slightly it can affect stability on slopes. I'd keep any addition as light as possible and test it on a gentle incline before going anywhere busy.
Did you buy it new or secondhand? If it's still under warranty, modifying the footwell might void it. Might be worth asking the dealer if there's an official accessory first.
I still think the posture angle matters more than people realize. My scooter has a decent footwell but I was getting ankle pain until I raised the seat height by about an inch and a half. It changed the whole geometry of how I sit. Not saying it will fix everyone but it's a cheap thing to try before drilling holes in anything.
Fair point about the warranty. If it's secondhand though, a small plywood extension is probably the cheapest fix. Just sand the edges so they don't catch on your trousers.
Post a reply
Trending Discussions
- I don't see mobility aids and walking as mutually exclusive 13 replies
- The front gate is narrower than the entrance to my house 9 replies
- Would a large sedan be practical for someone who needs to transport a scooter every weekend? 8 replies
- Are metal components always a sign of better build quality? 17 replies
- My scooter handles modern paving but hates old stone roads 12 replies